Patchwork Kindle Case

September 7, 2009


My mom received a Kindle for her fake birthday a couple weeks ago and she volunteered me to make her a protective case for it. She decided she wanted me to use her Flea Market Fancy. No problem! So I got busy thinking of an idea and drafting it out. It is super simple and easy to put together and a great way to protect the screen of your Kindle while stowed away in a purse or backpack. Oh, and it’s pretty, too! Don’t have a Kindle, you say…well, it would make a nice little case for other items as well.



First you will need to decide if you want to have your exterior be a solid piece of fabric, or something patchwork as I’ve done here. If you decide to do patchwork, the following is dimensions and basic directions.

Patchwork Piece Assembly

1. Cut out 35 pieces of fabric approximately 2-5/8” square.

2. Lay out your pieces 5 squares across by 7 squares down.

3. Sew together your squares by rows.

4. Sew together your 7 rows to form your patchwork piece.

**Note** Pay attention to your pressing and make sure to press your seams in opposite directions between each row so you can better match up your seams when sewing your rows together. See example of how you will match your seams here.


Next you will want to lay your fabric or patchwork piece onto some batting and quilt it as desired. For this piece I just sewed along both sides of all the seams in both directions. Trim to 15”x10”. Now you’re ready to assemble.

Kindle Case Assembly

IMG_2185 IMG_2187

1. Cut out your lining piece 15”x10” and lay right sides together with your quilted exterior piece.

2. Print and cut out the flap template and lay at one end of your fabric, making sure bottom edge of curve comes to edge of fabric. Pin in place.

3. Trim around curved edge and remove template.

4. Pin around entire piece, leaving a gap in the pins where you will turn the piece right side out after sewing. Sew around entire piece, backstitching at either side of opening.

IMG_2209 IMG_2214

5. Clip your corners at a 45 degree angle and then clip away the sides a little, as shown. This will make for a little less bulky corner.

6. Clip your curved seam, notching little triangle out around it, as shown. This also makes for a less bulky seam.

IMG_2213 IMG_2219

7. Press back your seam allowance at the opening and turn right side out.

IMG_2221 IMG_2222

8. Press the piece, making sure to round out your curve and bring out your points on the corners.


9. Top stitch two parallel lines along the straight edge of your piece. Mine are approximately 1/8” and 1/4” from the edge.


10. With lining fabric facing up, fold up bottom straight edge 4-3/4” and pin in place on the sides.


11. Using the diagram above, beginning on the right side just above the straight edge, edge stitch a scant 1/8” around the parameter of your case, including the bottom. When you arrive at the right side of the straight edge, backstitch neatly a few times to make this extra secure. After arriving back at where you started, backstitch neatly a few times.


Here’s a view of what the bottom will look like when you stitch across it.


12. Grab a self-adhesive Velcro dot set and put into place. Now you can stop here or continue on for one more step to make it extra secure.


I noticed after I was done that the edges could still easily come up and let stray items fall inside and potentially scratch the screen, and since my mom would be storing this in her purse, I wanted to make sure it was extra secure. So I did one more step to help keep the flap down.


13. With flap closed, pin down sides to keep securely in place, and then stitch and backstitch a few times at each side, making sure not to stitch past the straight edge on the inside. Stitch just to the straight edge and then begin you backstitch.


Now the sides stay down, helping to keep any excess dirt away from your Kindle.


To get your Kindle out quick and easy you just tilt back on those sewn corners and it’s easy as pie.


Front View


Back View


Side View – not too bulky!


For those of you lucky enough to have Kindle’s, I hope you find this tutorial useful. And for those of you without Kindles, I hope you’ll share with us what you use this little case for. As always, I’d love it if you shared your creations made from this pattern in my Flickr Group.

Updated :: Sorry about that, forgot the flap template link. It is linked above as well as right here. If the link gets too busy, it might be down for a little while, but if you check back it will be there again after I’m forgiven for all the traffic that gets sent to the link. I’m trying to find a better way to upload documents for all of you that doesn’t have bandwidth issues, but is still free.

Finished Dimensions: 9-1/4″ x 5-3/4″. The Kindle that goes inside of it is 8″ x 5-1/4″ and is 5/8″ thick. This is a snug fit for this Kindle, as you can see in the photos!

Prev Post

String Quilt Block

Next Post

Cathedral Window Block